18
Connection of the Control Board
1. Actuator 1 (Master gate, open first & close last)
Insert the stripped cable wires into the appropriate terminals on the opener terminals block. The
red
wire should
be inserted into the
“+MOTOR1”
terminal(#15), the
black
wire into
“MOTOR1-”
terminal (#16), the
blue
wire
into
“ULMT1”
terminal(#17), the
green
wire into
“COM”
terminal(#18), and the
yellow
wire into
“DLMT1”
terminal (#19).
2. Actuator 2 (Slave gate, close first & open last)
The
red
wire should be inserted into the
“+MOTOR2”
terminal(#20), the
black
wire into
“MOTOR2-”
terminal
(#21), the
blue
wire into
“ULMT2”
terminal(#22), the
green
wire into
“COM”
terminal(#23), and the
yellow
wire into
“DLMT2”
terminal (#24).
