WARRANTY
for 26" Mountain Bike
FlashStand
FAT
User's Guide
Topeak products are available only from professional bicycle shops.
Please contact your nearest Topeak authorized bicycle dealer for any questions.
For customers in the USA, call: 1-800-250-3068
Website: www.topeak.com
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture.
All warranties will be void if the the product is damaged due to user abuse, overload, system alteration, modification, or used in any way not intended as described in this
user's guide.
Copyright © Topeak, Inc. / 2008
* The specifications and design are subject to change without notice.
M-TW007-GB 9/08
• Remove any large or heavy bicycle accessories (handlebar bag, rack bag, large saddle bag, pannier bags, etc.) that may cause any possible injury.
• Never exert force on the bike when using FlashStand
FAT
. Doing so may damage FlashStand
FAT
's support legs.
• Not recommended for use on grass, loose dirt, gravel, uneven or soft surfaces.
• Topeak FlashStand
FAT
is designed for supporting your bike only.
INSTALLATION
When crank-arm width is larger
than 36mm, remove the top plate
of FlashStand
FAT
before installing.
Adjusting
FlashStand
FAT
height
PRESS
PRESS
• FlashStand
FAT
is NOT recommended
for use on downhill or freeride
mountain bikes because their bottom
bracket height designs may be
beyond the FlashStand
FAT
support
limitations.
• Adjust FlashStand
FAT
height to make
sure your bike is within the
recommended angle of
83˚~ 86˚
(from horizontal plane) for stability
of your bike.
1
2
83˚~86˚
3
PRESS
36mm (1.4")
45mm (1.8")
CAUTION
