101
TROUBLESHOOTING
LAN stop error
Failed to reset the LAN connection. Confirm that the LAN cable connection and
the LAN setting are in the correct way.
LAN restruct error
Failed to reset the LAN connection. Confirm that the LAN cable connection and
the LAN setting are in the correct way.
DHCP bind error(Timeout)
Failed to communicate to DHCP server.
DHCP bind error(NAK)
Failed to communicate to DHCP server.
IP address conflict.
Displayed when the IP address is duplicated.
Failed to get IP address.
Failed in IP address auto assignment. Set a fixed IP address, or check if the
DHCP server is running.
Unknown Error
Displayed in case of a LAN error other than the LAN errors mentioned previ-
ously.
Applying network settings
Displayed when applying network setting as "LAN connection" in the "LAN" is
switched to ON or OFF.
First Octet is 1-223 Range
Displayed when the first octet of "IP address", "Default gateway", "Primary
DNS server" or "Secondary DNS server" of the "LAN connection" is set to a
value out of the specified input range. Enter a value within the input rule.
The IP address is 0-255 Range
Displayed when either of each octet other than the 1st octet in "IP address",
"Default gateway", "Primary DNS server" or "Secondary DNS server" of the
"LAN connection" is set to a value out of the specified input range. Enter a
value within the input range.
Value is irregular. Input valid
value
Displayed when the "Subnet mask" of the "LAN connection" is set to a value off
the input rule. Enter a value within the "Subnet mask" input rule.
At least 3 characters are required
for operator ID prefix.
Displayed when the "Prefix of Ope. ID" of "Operator ID" is less than 3 charac-
ters. Enter a prefix with 3 characters.
RS-232C DATAOUT
RS-232C data output is in process.
RS-232C SUCCESS
RS-232C data output is completed.
RS-232C FAIL
RS-232C data transmission failed.
Previous measurements are left.
Please press the Clear button.
Displayed when the output of all output-set data fails.
Please wait until packing mode is
finished.
Indicates that the packing operation is in process. Wait until it is completed.
Packing mode is finished.
Please turn off the device.
Indicates that the packing operation is completed. Switch off the machine.
Please check the DATE/TIME
The battery for the built-in clock has become worn out. Before using, confirm
the time and date on the SETUP menu. If the message comes up frequently,
call your service engineer.
Incorrect password
Displayed when the password inputted to select a special mode is incorrect.
Summary of Contents for TRK-2P
Page 1: ...USER MANUAL AUTO KERATO REFRACTO TONOMETER TRK 2P...
Page 2: ......
Page 116: ......
Page 118: ...AUTO KERATO REFRACTO TONOMETER TRK 2P 41852 97030 Printed in Japan 1311 100LW0...
