32
6. BASIC OPERATION
* 1: Press [Menu mode] key, and the instrument returns to the “Basic screen” status.
* 2: Press [Menu mode] key, and the instrument returns to the “Procedure 2” status.
* 3: The menu number is changed according to models.
To operate the TP-L6W with smartphone, it is necessary to set
Bluetooth
connection (pairing).
After pairing is performed, connect to the smartphone.
• Pairing with smartphone is stored up to five units. When pairing with more than five smartphone units is done,
the pairing data are deleted from the oldest in the chronological order.
• When connected with a smartphone, the connection is held until the time mentioned below.
• When canceling the connection from the smartphone;
or
• When pairing is performed with any other smartphone.
• Laser Manager is an application on Android Mobile for remote control and support.
• If TP-L6W is not displayed during the pairing search in Laser Manager, please complete pairing on the OS.
After that, please do pairing again by Laser Manager.
• When pairing with some instruments on Laser Manager,
Bluetooth
connection between instrument and
Laser Manager may take some time. Please remove unnecessary instruments from
Bluetooth
connection
history list on Laser Manager.
• After disconnecting
Bluetooth
by Laser Manager, the instrument icon may not be displayed on the search
screen. Please wait for a while and re-enter the
Bluetooth
connection screen again.
■
Turning ON the
Bluetooth
power supply
When the
Bluetooth
power supply is ON, the "
Bluetooth
power ON" icon is indicated.
Factory setting: [OFF]
6.6
Setting
Bluetooth
Connection
Procedure
Key operation
Display
1. Press [Menu mode] key. *1
2. Press [Down] key four times. *1
3. Press [Set/Lock] key. *2
4. Press [Left] key. *2
MENU(1/5)
* 3
BEAM SETTING
Four times
MENU(5/5)
* 3
BLUETOOTH
BLUETOOTH(1/3)
BT POWER
ON
OFF
BLUETOOTH(1/3)
BT POWER
ON
OFF
