60
4.1.12 AVT Command
Set the times of average measurement in the instrument.
AVT_# :
“#” is the measurement times “0 – 20”.
4.1.13 AVTR Command
Read the setting of the average measurement times in the instrument.
4.1.14 FLD1/FLD2/FLD3/FLD4 Command
Change the setting for the measuring angle in the instrument.
FLD1
: Change the measuring angle to the 2.0 position.
FLD2
: Change the measuring angle to the 1.0 position.
FLD3
: Change the measuring angle to the 0.2 position.
FLD4
: Change the measuring angle to the 0.1 position.
FLD1/FLD2/FLD3/FLD4+(Cr
･
Lf)
“OK”+(Cr
･
Lf)
PC
Command/Communication direction
SR-NIR
PC
Command/Communication direction
SR-NIR
AVTR+(Cr
･
Lf)
“
OK”+(Cr
･
Lf)
Measurement times+(Cr·Lf)
“END”+(Cr
･
Lf)
AVT+(Cr
･
Lf)
“OK”+(Cr
･
Lf)
PC
Command/Communication direction
SR-NIR
