Topcon SL-D301 User Manual Download Page 49

Page: 49 / 56

OPTIONAL ACCESSORIES

TOPCON SLIT LAMP SL-D301 provides the following optional accessories for imaging.
For inquiries, please call your dealer or TOPCON (see the back cover)

•For details, please refer to the instruction manuals of each product.

SYSTEM CONFIGURATION

CAUTION

To prevent falling during use and movement, secure optional accesso-
ries.

CAUTION

To avoid electric shock, do not touch the external connection terminal
and the patient at the same time.

TOPCON product

Products of other

System Chart

Background Illumination
BG-2GN

Hruby
Lens

Diffusion Lens
SO-DFL01

Yellow Filter

Iris Diaphragm

SO-DF01

Tonometer Mount

SO-TM1

Applanation
Tonometer
Model R900

Adapt Cover
SO-AC7

Digital Camera Unit
DC-4

Parallel
binoculer Tubes
PB-2

12.5X
Eyepiece

20X
Eyepiece

The one there is no click but
with measurement scale.

The one there is click, and
without scale.

The one there is click, and
with scale.

The one there is click, and
with measurement scale.

LAN cable

SO-LAN01

insulating transformer

Tabletop SO-TABLE06

For AIT-16

For Unit table

Tabletop SO-TABLE07

Trigger cable
SO-TRIG01

Summary of Contents for SL-D301

























































Search results

Summary of Contents for SL-D301

Reviews:

Related manuals for SL-D301

Brands by name

Popular brands

Topcon SL-D301, User Manual

Search results

Summary of Contents for SL-D301

Reviews:

Related manuals for SL-D301

Brands by name

Popular brands