Topcon SL-100, Installation And Setup Gude

Page: 13 / 36

9911-1015 Power and Serial Cable to MC-R3 Breakout A Cable Connection
P/N 1000226-01
7
3. Pull back the rubber boot on the Breakout A cable to expose the wire comb.
Figure 11. Expose Wire Comb
4. To remove the sealing plugs from pins 5, 17, 27, 34, 37 & 39 from the wire comb, insert a
large paper clip, or something similar, into the mating end of the connector, and push out
each sealing plug.
Figure 12. Remove 6 Sealing Plugs
Rubber Boot
Wire Comb
Wire Comb
Remove 6
Sealing Plugs