Topcon Pocket-3D, Reference Manual, Page: 128 / 316

Data Menu
Pocket-3D Reference Guide
3-18
Conversion Formats
On the
Conversion formats
dialog box displays (Figure 3-28), do the
following to create, edit, or delete a conversion format:
•
New
– on the
conversion formats
dialog box (Figure 3-28), press
to enter a conversion format. The
Format name
dialog box
displays (Figure 3-28).
– Format name: enter the name of the conversion format.
– Extension (
e.g.,TXT
): enter an extension type. Only enter
generic ASCII formats; such as,
.txt, .asc, .csv,
etc.
Figure 3-28. Conversion Formats/Format Name Dialog Boxes
•
Edit
– on the
Conversion formats
dialog box, press
Edit
to
change the selected format. See the “New” bullet above for
details on the dialog box that displays.
•
Delete
– on the
Conversion formats
dialog box, press
Delete
to
remove the selected format.
The Line Items
tab on the
Format name
dialog box adds, edits, or
deletes line items for the selected conversion format (Figure 3-30 on
page 3-19).
•
Add
– on the
Line items
tab, press
Add
to add a line item and it’s
respective information (Figure 3-29 on page 3-19), then press
Ok
to save the information. Repeat this process for each line item.
– Type: select either
Point name
,
Point description
,
Point
northing
,
Point easting
,
Point elevation
,
Point layer name
,