manualshive.com logo in svg

Topcon PixelChart PC-50S, Instruction Manual, Page: 9 / 54

Share
Download
Topcon PixelChart PC-50S Instruction Manual Download Page 9

7

MAINTAINABLE RANGE

USER MAINTENANCE

To ensure the safety and performance of this instrument, all maintenance work, unless specified in this
manual, shall be conducted by trained service engineers.
The following maintenance task may be done by the user.
For details, see "MAINTENANCE" in this manual.

CLEANING THE LIQUID CRYSTAL DISPLAY

The liquid crystal display of the instrument can be cleaned by the user.  For details, refer to "Cleaning
the liquid crystal display" on page 40 in this manual.

CHECKING THE MOUNTING UNITS FOR LOOSENESS

The user can check if the mounting units of this instrument are loosened.  For details, refer to "Check-
ing the mounting screws for looseness" on page 41 in this manual.

ESCAPE CLAUSE

• TOPCON shall not take any responsibility for damage due to fire, earthquakes, actions by third per-

sons and other accidents, or damage due to negligence and misuse by the user and any use under
unusual conditions.

• TOPCON shall not take any responsibility for damage derived from inability to properly use this

instrument, such as loss of business profit and suspension of business.

• TOPCON shall not take any responsibility for damage caused from using this instrument in a man-

ner other than that described in this instruction manual.

• Diagnoses made shall be the responsibility of pertaining doctors and TOPCON shall not take any

responsibility for the results of such diagnoses.

Summary of Contents for PixelChart PC-50S























































Reviews:

No comments