Topcon mmGPS 3D Paver, Reference Manual

Page: 132 / 288

Setting up the Machine and 3DMC
mmGPS 3D Paver Reference Manual
3-62
2. Select the
Point of interest
(either Left cutting edge, Mid cutting
edge, or Right cutting edge), and press
Measure
(Figure 3-60);
the
Measuring
dialog box displays during measurement.
Figure 3-60. Select Point of Interest and Press Measure
3. When finished, the
Position Check
dialog box displays the point
on the job at the selected edge of the blade (Figure 3-61). Press
Cancel
to return to the Main Screen.
Figure 3-61. Position of Point of Interest
2a
2b