Topcon KR-1W, Instruction Manual

Page: 148 / 188

146
FUNCTION SETTING USING SETTINGS SCREEN
PRINT SEQUENCE OF KRT VALUES (DATA ORDER)
The display sequence of cornea refractory power/radius curvature can be changed. Before
shipment, the default setting is "D/mm" (Print diopter values first).
1
Tap the Set Condition button of the set item display "Data Order" of "PRINT INT."
2/ 2
D/mm
mm/D
ON
ON
ALL
ON
D/mm
ON
ON
SETTINGS
MEASURE
INITIAL
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
S.E. Data
PD Data
KRT Data
KRT Average
Data Order
KRT CYL
TOPCON Logo
2
Tap the Setting Change button and select "D/mm" (Print diopter values first) or "mm/D"
(Print mm values first).
3
Setting is complete.
PRINTING THE CORNEAL ASTIGMATIC POWER (KRT CYL)
The corneal astigmatic power and axial angle can be printed. Before shipment, the default set-
ting is "ON" (Print corneal astigmatic power and axial angle).
1
Tap the Set Condition button of the set item display "KRT CYL" of "PRINT INT."
2/ 2
ON
OFF
ON
ON
ALL
ON
D/mm
ON
ON
SETTINGS
MEASURE
INITIAL
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
S.E. Data
PD Data
KRT Data
KRT Average
Data Order
KRT CYL
TOPCON Logo
2
Tap the Setting Change button and select "ON" (Print corneal astigmatic power and
axial angle) or "OFF" (Do not print corneal astigmatic power and axial angle)).
3
Setting is complete.
PRINTING THE TOPCON LOGO (TOPCON LOGO)
TOPCON logo can be printed. Before shipment, the default setting is "ON" (Print TOPCON
logo).
1
Tap the Set Condition button of the set item display "TOPCON Logo" of "PRINT INT."
2
Tap the Setting Change button and select "ON" or "OFF."
3
Setting is complete.