Topcon HiPer SR, Operator'S Manual, Page: 17 / 103

Introduction
Unpacking Your Receiver Kit
3 P/N: 1000737 ‐ 01
•
Integrated multi ‐ channel LongLINK™ wireless communication technology
•
(Cellular) Integrated cellular modem for independent and cable ‐ free network operation
•
(Cellular) Dual SIM operation to allow use of two services
•
8 GB internal memory
•
Internal batteries, providing at least 15 hours of operation in any configuration
•
A highly visible display panel with single ‐ button operation
•
USB and power/RS ‐ 232 ports
You can configure the HiPer SR receiver in a variety of ways, depending on your project requirements. Typically, the receiver
supports the following operation modes:
•
Static post ‐ processing
•
LongLINK Base and Rover RTK
•
Network Rover RTK
•
Network Base RTK
•
SBAS ‐ enabled navigation
Unpacking Your Receiver Kit
This section describes the documentation, standard kit components, and accessories (depending on your purchase) that
accompany your receiver. When you unpack your receiver kit, verify you received the items listed in this section. Make sure the
items do not appear damaged from shipment. If any of the items are missing or damaged, contact your Topcon dealer or Topcon
technical support. See “Getting Technical Support” on page 7.
•
Standard components are illustrated in Figure 2.
•
Receiver accessories are illustrated in Figure 3.
•
Receiver documentation is listed on page 5.