Topcon HiPER GD, Operator'S Manual

Page: 81 / 180

Radio Configuration
1-866-4TOPCON www.topconpositioning.com
2-39
7. Press Configure GSM to display the appropriate Cell
Phone parameters dialog box, and enter the following
parameters for either the Base or Rover (Figure 2-38).
Figure 2-38. Set Base or Rover Cell Phone Parameters
• For the Base radio – If your GSM modem does not
require a PIN, leave this field blank.
The Base radio is the Slave, only receiving calls from
Rover stations, so no phone number to call is required.
• For the Rover radio – If your GSM modem does not
require a PIN, leave this field blank.
The Rover radio is the Master, sending calls to the Base
station. The Base station’s phone number is required,
so have it available to input at this time, or select the
correct number from the Phone number list (if
available).
At this time, you can press Add to save the phone
number to the list, or you can press Delete to remove
unwanted phone numbers from the list.
8. Press OK to return to the radio configuration screen.
Continue with other configuration or operation
functions as needed.