Topcon HiPER GD, Operator'S Manual

Page: 55 / 180

Connecting the Receiver and a Computer
1-866-4TOPCON www.topconpositioning.com
2-13
4. Click File->Connect (Figure 2-9).
Figure 2-9. Click File->Connect
5. On the Connection Parameters dialog box, select the following
parameters and click Connect (Figure 2-10):
• Set the Connection mode (Direct).
• Set the port for your computer (typically COM1) from the
Port drop-down list.
• Set the communication rate between the receiver and the
computer (usually 115200) from the Baud rate drop-down
list.
Figure 2-10. Connection Parameters
Once a connection has been established, the COM port and baud
rate will be displayed in the lower-left corner of the main window
of PC-CDU. A timer will begin to count up in the lower-right
corner as well (Figure 2-11 on page 2-14).