10 SETTING ATMOSPHERIC CORRECTION
10-11
2.3
開啟電源
c
先將儀器整平。
d
打開電源。
e
搖動望遠鏡直到儀器設定好垂直度盤之
0
度位置。
若有設定水平度盤之零度之偵測模式，則須旋轉儀器。
開啟電源
TOPCON GTS-700
旋轉望遠鏡與儀器
14-12-94 15:30:40
Prog Std Mem
Comm
Adj Para
主畫面
z
先確認電池之剩餘電量後，再決定是否取下充電或更換已充飽的電池。
z
參閱
2.4 "
電池之剩餘電量顯示
"
。
Note : For setting the vertical angle at 0
°
, an electronic datum 0 is
provided on the vertical angle circle. If the telescope is turned
and the sensor passes the datum 0, angle measurement begins.
The datum 0 is placed near the level position of the telescope,
the vertical angle setting of 0 can easily be set by rotating the
telescope.
電池之剩餘電量顯示
Summary of Contents for GTS-710 Series
Page 1: ...GTS 710 GTS 710 GTS 711 GTS 712 GTS 713...
Page 9: ...1 NOMENCLATURE AND FUNCTIONS 1 9 1 1 1 BT 30Q Lower horizontal clamp Point guide type only 4A...
Page 76: ...11 CORRECTION FOR REFRACTION AND EARTH CURVATURE 11 68 Temprerature C Temprerature F...
Page 77: ...11 CORRECTION FOR REFRACTION AND EARTH CURVATURE 11 69 Temprerature F...
