Topcon GTS-230 Series, Instruction Manual

Page: 76 / 163

7-8
7 DATA COLLECTION
●
Searching the recorded data
While executing the DATA COLLECT mode, you can search the recorded data.
*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.
*2) PCODE can be input by inputting a register number linked with PCODE Library.
To show the list of PCODE library, press the [F2](SRCH) key.
*3) Data collect sequence can be set to [EDIT
→
MEAS]. See to Section 7.6 “Setting Parameter of Data
Collect [CONFIG.]”.
*4) The mark "*" indicates the previous measuring mode.
*5) You can confirm the measured data as follows. Refer to Section 7.6 “Setting Parameter of Data Collect
[CONFIG.]”.
Operating procedure Operation Display
1
While executing the DATA COLLECT mode, press
[F2](SRCH) key. *1)
The using file name will appear on the top of the
right side of the display.
[F2]
2
Select one of three search methods by pressing
[F1] to [F3] key. *2)
[F1] to [F3]
*1) It is possible to see the PCODE list when the arrow is located beside PCODE or ID.
*2) The operation is same as the "SEARCH" in the MEMORY MANAGER mode.
For more information, refer to Section 9.2 “Searching Data”.
V : 90°10'20"
HR: 120°30'40"
SD: 98.765 m
> OK ? [YES][NO]
PT#
→
PT-02
PCODE :
R.HT : 1.200 m
INPUT SRCH MEAS ALL
SEARCH [TOPCON]
F1:FIRST DATA
F2:LAST DATA
F3:PT# DATA