T o p c o n
F H 9 1 5 / 2 4 0 0 C o m m a n d s R e f e r e n c e M a n u a l
6
Step 6. On the
ASCII Setup
window, select the
Echo typed
characters locally
and
Wrap lines that exceed terminal
width
check boxes and then click
OK
(see Figure 1-5).
Figure 1-5.
Select necessary settings and click OK.
Step 7. Click
OK
on the
Properties
window to return to the
Main
HyperTerminal
window.
Step 8. From the
Main
window, select
Transfer
X
Send Text
File
. The
Send Text File
window will appear. Navigate to
the location of the file that contains the commands
enabling Daisy Chain. Highlight the appropriate file and
click
Open
.
Figure 1-6.
Send Text File window - Enable Daisy Chain
