7
1 - 8 6 6 - 4 T O P C O N
w w w . t o p c o n g p s . c o m
The commands will output to the receiver (Figure 1-7).
Figure 1-7.
Daisy Chain activated
Once the output is complete, you can configure the radio
modem using the commands described in Chapter II on
Disabling Daisy Chain
After you have made the necessary changes in the radio modem,
you should return the receiver’s ports which are currently in Daisy
Chain mode to Command mode.
It can be done by following these steps:
Step 1. Save the commands that follow into an ASCII file (for
example,
Modem_Daisy_Chain_disabling
)
.
#OFF#
%%set,cur/term/echo,/dev/null
%%set,cur/term/imode,cmd
%%set,dev/ser/c/echo,/dev/null
%%set,dev/ser/c/imode,cmd
Step 2. From the
Main
window of the HyperTerminal program,
select
Transfer
X
Send Text File
. The
Send Text File
window will appear. Navigate to the location of the file
