Topcon FC-6000, Operator'S Manual

Page: 30 / 62

26
FC-6000 Field Computer Operator’s Manual
Ethernet Specifications
„
10/100/1000 Mbps twisted-pair Ethernet
„
IEEE802.3/802.3u/802.3ab 10BASE-T, 100BASE-TX, and
1000BASE-T
„
Manages twisted pair crossover detection and correction
„
Full-duplex and half-duplex capability (only full-duplex operation
at 1000 Mbps)
Maintenance and Environmental Issues
„
The dock is intended for indoor use only.
„
Temperatures should be between 0°C to 50°C.
„
Avoid using the dock in situations where water can enter the
connector ports. It is not sealed against water and must be kept
dry.
„
Do not touch the docking pins (spring loaded contacts) with
conductive items when power is applied to the dock.
„
Do not drop items on the dock that can damage the pins.
„
Keep debris off of the docking pins.
Battery Charger
The Battery Charger is an optional accessory, allowing you to
charge spare battery packs for the FC-6000.
How to Use the Battery Charger
Batteries charge best at room temperature (about 68°F or 20°C).
Batteries will not charge (or might charge slowly) at temperatures
below 32°F (0°C) or above 122°F (50°C).
Power the Battery Charger by using the AC wall charger provided
with your FC-6000. Slide the battery pack into the battery charger,
orienting it so that the battery contacts meet the charging contacts
in the battery charger. The red LED flashes slowly, indicating that
the battery pack is charging.
LED Indicator
The LED indicates the charging status:
„
Solid, on: The battery pack is fully charged.
„
Blinking (slow): The battery pack is charging.
„
Off: There is no power. The battery is not charging.