109
GENERAL INFORMATION ON USAGE AND MAINTENANCE
ELECTRIC RATING
Source voltage : AC 100-240V
Frequency
: 50-60Hz
Power input
: 250VA
DIMENSIONS AND WEIGHT
Instrument
Dimensions : 320 - 359mm (W) × 523 - 554mm (D) × 560 - 590mm (H)
Weight
: 21.8kg (DRI OCT-1 Model Triton)
Weight
: 23.8kg (DRI OCT-1 Model Triton plus)
SYSTEM CLASSIFICATION
•
Types of protection against electric shocks:
This instrument is classified as Class I equipment.
Class I equipment does not depend only on basic insulation for protection against electric shocks,
but also provides a means of connection to a protective earth system of facilities so that metal parts
that come into contact do not become conductive while the basic insulation is in failure.
•
Grade of protection against electric shocks:
This instrument is classified as Type B applied part.
Type B applied part provides a specified grade of protection to prevent electric shocks, particularly
for reliability against current leaks, measuring current and protective earth current (in case of Class I
equipment).
•
Degree of protection against harmful ingress of water: IPx0
The DRI OCT-1 Model Triton has no protection against ingress of water. (The degree of protection
against harmful ingress of water defined in IEC 60529 is IPx0.)
•
Classification according to the method(s) of sterilization or disinfection recommended by the manu-
facturer: not applicable.
The DRI OCT-1 Model Triton has no part to be sterilized or disinfected.
•
Classification according to the degree of safety of application in the presence of a flammable anes-
thetic mixture with air or with oxygen or nitrous oxide:
•
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with
oxygen or nitrous oxide.
•
The DRI OCT-1 Model Triton should be used in environments where no flammable anesthetics
and/or flammable gases are present.
•
Classification according to the mode of operation: Continuous operation.
Continuous operation is the operation under normal load for an unlimited period, without the speci-
fied limits of temperature being exceeded.
•
Class of laser product: Class 1 laser product according to IEC 60825-1:2001
Class 1 equipment is a laser product which is safe under the rationally predictable operation condi-
tions, and keeps safety for human eyes even if any optical system (lens or telescope) is used as a
condensing unit.
