6TOPCOM SMC-1000H
TOPCOM SMC-1000H
IV
Lower back massage
•
Press this button for a massage of your lower back only.
•
Only the 3 lower massage control LED (VI) will illuminate.
•
The massage will skip the upper bag during massage.
•
Press this button again to switch the massage off.
V
Seat vibration
•
Press this button to activate the seat vibration. The vibration will turn On in low-intensity and the
corresponding LED (L) will illuminate.
•
Press this button repeatedly to switch to medium (M) intensity, high (H) intensity or to deactivate the
seat vibration.
VI
Massage control LED
•
These LED’s will illuminate depending on the selected back massage.
VII
Heat function
•
Press the heat button to activate a suitable heating function and the corresponding LED light will
illuminate.
•
Press the button again to turn the heat function off.
The heat function cannot be turned on if no massage program is selected.
VIII
Demo button
•
Press this button to demonstrate the features of the massage cushion.
6
Technical data
7
Cleaning
•
Disconnect the device and allow it to cool down.
•
Clean it with a soft cloth or slightly damp sponge.
•
Never allow that water or any other liquid enters the device or accessories.
•
Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
Dimensions (W/H/D)
Weight
Power supply unit voltage:
– Input:
– Output:
670 x 143 x460mm
3.86 Kg
100-240 V/AC/50-60 Hz
12V DC 3A
There is a 15-minute auto shut off on the unit for your safety.
When the massager is switched off, the massage mechanism will always return to its
lowest position.
When selecting the seat vibration together with the back massage, there will be a
slight decrease of the vibration strenght. This adjustment is perfectly normal and
should not be interpreted as a defect.
