10
11
8. OPERA T I O N
8.1. OUT OF RANGE W
A R N I N G
Obstacles between the handset and the base station will influence the operation
range. When the handset is too far away from the base station, the quality of the
connection will deteriorate and you will hear a warning tone (2 signals). The
communication will be broken automatically if you do not go back into the
operation range within 10 seconds.
If a connection between the handset and the base station is not possible, you
will hear an intermittent warning tone.
8.2. TONE AND PULSE DIALLING
Standard the Mira 100 has been set to pulse dialling. It is possible that the
dialling system has to be changed to tone dialling (DTMF) before a call can be
made. Your telephone has to be set to the dialling system, which is offered on
your telephone line.
Pulse dialling
: if you are connected to an older (mechanic) telephone exchange.
Tone dialling : if you are connected to a modern electronic (DTMF) telephone
exchange.
8.2.1. TEMPORARY PULSE -> TONE SWITCH
1. Press the line button
and wait for the dial tone.
2. Press the set button
(“SET” appears on the display).
3. Press the numbers “28 ” and the
button.
4. Press the line button
.
8.2.2. BACK TO PULSE DIALLING
1. Press the line button
and wait for the dial tone.
2. Press the set button
(“SET” appears on the display).
3. Press the numbers “28 ” and the # button.
4. Press the line button
.
8.3. MAKING A TELEPHONE CALL
Make sure the correct dialling system has been set (pulse or tone dialling) by
making an outgoing call. Press the line button
and wait for the dial tone. The
radio connection indicator
on the base station lights when the radio connec-
tion has been established. Now dial the desired telephone number.
Press the line button
after ending the telephone conversation, the Mira 100
returns to standby and “ON” appears on the display. In case you want to make
another phone call, press the hang-up button
instead of the line button and
dial the desired telephone number.
8.4. RECEIVING A TELEPHONE CALL
When you are being called, first the base station will ring and after a short period
of time also the handset. Press the line button
. When you hear a beep, you
can start the conversation. Press the line button
again to end the conversa-
tion.
8.5. MUTE FUNCTION
If you wish to talk to a third person without your correspondent hearing this con-
versation, you can temporarily turn off the microphone. Simply press the mute
button
. The display will start blinking. When you want to continue the tele-
phone conversation, press the mute button
again.
Mira 100
Mira 100
