Topcom HHM-2100H, User Manual

Page: 6 / 108

6 TOPCOM Handheld Massager 2100H
TOPCOM Handheld Massager 2100H
4.2 Using the massager
• Plug the end of the power cord into the 220V~240V AC outlet. The wall outlet for
the power supply must be close and accessible.
• Slide the On/Off switch to position ‘M’ to activate the massage function.
• Slide the On/Off switch to position ‘M+H’ to activate the massage fu heating.
The infrared heating will be activated along with the vibration. It will take a few minutes to
heat up the massage head surface.
The heating function will heat the massage head
to body temperature.
It is only for giving extra comfort during massage. More excessive heating could lead to
injuries.
4.3 Vibration intensity
When the massager is active, the intensity can be changed by sliding the Intensity switch
to ‘High’ for hard intensity or ‘Lo’ for a soft massage.
4.4 Removing the handle
The Handheld Massager 2100H can be used eather with or without handle.
•
Press the handle release buttons together and pull the handle from the main unit.
• Loosen the hand strap .
• Place the hand palm over the massager and adjust the strap.
4.5 Re-installing the handle.
• Press the handle release buttons together
• Align the handle with the massager and push the handle into the main unit.
• Release the handle release buttons to fix the handle.
4.6 Changing the massage head
The Handheld Massager 2100H comes with 2 additional massage heads.
To change the massage heads:
•
Disconnect the massager from the main power and make sure that the On/Off switch
is set to ‘OFF’.
• Turn the massage head counter clockwise until it comes off the unit.
• Pick another massage head.
• Align the massage head with the screw and turn the massage head clockwise until it
stops turning.
Do not use excessive force. This might damage the attachement.
7
2
2
3
A
5
4
A
5
A
2
3 B
3
HL_HHM-2100H D143.book Page 6 Friday, May 8, 2009 9:31 AM