Domo
M
7
M
8
Domo
4. The recorded message will automatically be rewinded.
5. The answering machine is ready to register incoming messages.
3.2. CHECK THE MESSAGE
Press and release the key (message) (5).
Your message will be reproduced after 2 seconds.
Note :
•
Your device has to be switched on during the recording or checking of
your message.
•
Turn the volume knob downwards if you want to listen to the message
loudly and clearly.
•
To decrease the volume, turn the volume knob upwards.
4. INCOMING MESSAGES (ICM)
Toll saver:
Your unit will answer after 2 rings if you have received messages and after 4
rings if there are no messages. Hang up after the third ring to save time and
phone charges
Remark :
If your TOPCOM DOMO has not been switched on, incoming messages are
answered after 10 rings.
Note:
We deliver the telephone answering machine as a standard device with a
microcassette of 20 minutes, of which 1 minute is being used for your outgo-
ing message. This means that the remaining 19 minutes can be used for the
recording of incoming messages (maximum 1 minute per message).
4.1. SWITCH YOUR TOPCOM DOMO ON
Tune the ON-OFF/VOLUME knob (8) downward. The red led (4) switches on.
4.2. SWITCH YOUR TOPCOM DOMO OFF
Tune the ON-OFF/VOLUME knob (8) upward until you hear a click. The red led
(4) switches off.
5. VOLUME ADJUSTMENT
To be able to listen to your outgoing message and the other incoming mes-
sages loudly and clearly, you have to turn the volume knob on the left side of
your device downwards. To decrease or to switch off the volume you have to
turn the volume knob upwards.
6. CALL SCREENING OF INCOMING MESSAGES
Adjust the volume of your TOPCOM DOMO in order to be able to listen atten-
tively. You can just listen to the incoming messages or you can answer them
by picking up the receiver. In the last case your TOPCOM DOMO receiver will
automatically stop recording the message.
7. INDICATION OF RECORDED MESSAGES BY
MEANS OF THE LED (4) FLASH
The led (4) flash shows whether messages have been recorded.
