Topcom Butler E300, User Manual

Page: 15 / 208

Topcom Butler ME300/Twin/Triple/Quattro 11
Topcom Butler E300/Twin/Triple/Quattro
ENGLIS
H
8 Register to a Topcom Butler E300 base
You can subscribe 4 handsets to one base unit. By default, each handset is subscribed as
handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if:
•
The handset subscription has been removed from the base unit (e.g. for reinitialisation)
• If you want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Topcom Butler E300 handset and base unit!!
Keep the Paging key on the base unit pressed for 4 seconds. During one minute the base
unit is in register mode and you must do the following to subscribe the handset:
Press Menu button
Æ
Use the button to scroll to ‘ System ’ and press
Æ
Select ‘ Register ’
Æ
Enter the base pin code (0000) and press . Enter the number of
the base unit you would like to subscribe the handset to (1-4)
Æ
The unit will start searching
for the base and when found it will register Æ If the pin is wrong, the handset will restart the
searching for the base
Æ
When the handset is registered, it will show the handset name and
at the right the handset number.
8.1 Selecting a base unit
You can switch your handset between different registered base units if you have registered
a handset to more then one base. You can manually select the base unit or automatically let
the handset choose the nearest base.
Press Menu button
Æ
Use the button to scroll to ‘ System ’ and press
Æ
Select ‘ Select base . Æ Select ‘ Auto ’ or the base number (1-4) by the Up/Down /
keys and press .
8.2 Removing a handset
You can remove a handset from a base to allow another handset to be registered:
Press Menu button
Æ
Use the button to scroll to ‘ System ’ and press
Æ
Select ‘ Delete HS ’. Press OK and select the handset you which to remove (1-4)
Æ
Press
OK to confirm
Æ
Enter the pin code (0000) and press .
You can only remove existing handsets and others then the one you are
using.