SOL-96.110.061 / 031221
TOPAZ Manganese
Configuration of the Analyzer
47
Parameter Menu
To access the parameter menu, press the button on the main
screen. The parameter menu allows user to make the following
settings:
Threshold 1
Threshold value for relay OUT_DIG3.
The definition as high or low threshold value is made in the
<THRESHOLD> tab of the <OPTIONS> menu.
Threshold 2
Threshold value for relay OUT_DIG4.
The definition as high or low threshold value is made in the
<THRESHOLD> tab of the <OPTIONS> menu.
Min. 4–20mA
Beginning point of the linear scale.
Max. 4–20mA
End point of the linear scale.
Note:
In addition to the settings listed above, the Parameter
menu contains further settings which are not documented in this
manual. Adjust these values only if instructed to do so by Seres
OL customer service.
