SOL-96.110.061 / 031221
TOPAZ Manganese
Installation
22
3.4.5
Jbus via TCP/IP (Option)
Connecting the
Ethernet cable
If the “Ethernet interface (TCP/IP)” option has been ordered, a
converter has been installed in the upper part of the analyzer.
The connection is made via the Ethernet port located on the right
side of the analyzer exterior. Mount the supplied connector onto the
Ethernet cable and connect it to the port.
Addressing
modes
The converter can be configured to obtain the IP address automati
-
cally via DHCP or a fixed IP address can be configured. Clarify in
advance which type of IP address assignment is to be used at the
installation site.
A
Converter
A
