4.
&
ADJUSTABLE FITTER MOUNTING
POLE MOUNTING (TYPE D)
4.1 ADJUSTABLE FITTER MOUNTING
Step 1:
. (Figure 17)
Remove the spare parts from A&D bracket
Step 2:
Loosen the four bolts on A&D bracket, connect the wires correctly, and pull the wires into
the poles
.(Figure 18)
Step 3:
. (Figure 18)
Place the bracket into the pole and lock the four bolts
Notice: Adjustable angle is 0-90°(Figure 18)
4.2 POLE MOUNTING
Step 1: Remove the four bolts from A&D bracket, remove the four rubber plugs from installation
bar, put the four rubber plugs on the place where the fours bolts were previously placed
on the bracket for waterproof purpose(Figure 19)
Step 2: Fix A&D bracket to square pole with bolt, open the cover of A&D bracket junction box, pull
the wire into bracket junction box, connect the wire properly and cover the junction box.
(Figure 20)
Notice:
.(Figure 20)
Adjustable angle is 0-90°
Same as round pole installation, please remember to use the adapting plate for round pole
installation( Figure 21)
Figure 19
Figure 17
Figure 18
Figure 20
Figure 21
90°
Support
Locking bolt
Adjusting bolt
Wire
Adapting Plate
A&D Bracket
Round Pole
Installation bar
Rubber plug
Fixing Bolt
Square Pole
Cap
90°
Adjusting
bolt
A&D Bracket
A&D Bracket
Locking bolt
Spare Part
Junction Box
INSTALLATION INSTRUCTIONS FOR LED AREA LIGHT
Luminaire
Luminaire
Luminaire
