11
www.topazsystems.com
GemView 10 Tablet Display User Manual
After configuring the tablet display, you may test it as follows:
1. Click the identify button; the number 1 should appear on the main display and the number
2 should appear on the tablet display.
2. Move your mouse from the main display to the tablet display; it should track properly.
3. Move a window from the main display to the tablet display; it should appear normally and
respond to mouse interactions.
Install GemView Tablet Display Driver
Note: If you are using your computer in a Citrix environment, please refer to the
document
GemView Tablet Displays in Citrix XenDesktop Environments
. If you are
using your computer in VMWare Horizon environment, please refer to the document
GemView Tablet Displays in VMWare Horizon Environments
. These guides will provide
setup and configuration instructions.
Download and run the GemView installer from the Topaz website:
www.topazsystems.com/software/download/gemview.exe
.You must reboot your PC after
the installation completes. This software provides pen input functionality for the tablet display.
