5
www.topazsystems.com
Back to Top
Ethernet Adapter How-To Guide
In the
“Device Status” window, it will say if the device is working properly or not. Next, click on
the
“Advanced” tab to open the “Advanced Properties” window.
Here, the user can see what COM Port number the Digi Connect ME has been assigned. In
this case, the COM Port Number is 6. If needed, the user can change the COM port setting
here.
It is important to note though that changing the COM port setting after installation will require
that the SigPlus.INI file be altered either manually or through
SigPlus Adjust
.
