Top BRP70 Series, User Manual

Page: 16 / 20

13
BRP70
6. Maintenance
If LED or sensor interfered by foreign objects may cause bill jamming and
decrease acceptance rate. To make sure the bill acceptor always works
smoothly, please clean the internal parts regularly.
7. Troubleshooting
LED Flash Status Corrective Actions
1 Bill jammed
Open bill path unit and then remove the
jammed bill.
2 Disable Adjust correct DIP switch setting.
3 Sensor error
Inspect for foreign objects on sensor or bill path
and clean.
3+2 Hook sensor error
Inspect for foreign objects on security hook and
clean.
3+4 Fish sensor error
Inspect for foreign objects on sensor or bill path
and clean.
4
A stringing attempt has
detected
Inspect for foreign objects on sensor or bill path
and clean.
6
Stacker error or stacker
full
Inspect for foreign objects on stacker and clean
or empty the bill box.
7 Motor error
Inspect for foreign objects on bill path and
clean.
light transmission gap
To clean the internal parts :
1. Turn Bill Acceptor off.
2. Open LED Assembly by
pushing buttons on both
sides.
3. Use a soft, dry cloth or
towel to clean the bill path
and sensors.
**To prevent interfere the
barcode reading, make sure
keep the light transmission
gap always in cleancondition,
avoid any dirt and dust
sticking on it.