3
www.topvehicletech.com
FITTING GUIDE
1. Using a panel removal tool remove the cigarette lighter panel surround, the left and right panel that
surrounds the main radio and the top panel surrounding the display, disconnecting the hazard switch in
the process.
1. Open the passenger side door and proceed to pull away the door trim from the pillar.
STEREO REMOVAL
DAB ANTENNA INSTALLATION
2. Using a set of panel removal tools, begin to pry away the pillar casing.
4. The DAB antenna not only has a self adhesive backing, but also features a black earth sheet. When plac
-
ing the DAB antenna, the earth sheet
MUST
be placed onto the metal part of the pillar. The antenna itself
must be located roughly 15cm from the top of the windscreen.
Note: this antenna must not be placed atop any kind of heating elements, this will interfere with the
antenna’s signal.
5. Once happy with the placement, take the 3m of wiring extension and feed it down through to the
stereo’s opening. With the wiring adjusted to the appropriate length, feel free to re-install the glovebox.
3. The glovebox will need to be dropped down to route the antennas wiring. To do this, first open the
glovebox and unclip the glovebox side panel. You will need to remove 2x bolts atop the inside lip, 2x at the
bottom, and 2x underneath. Once free, simply leave in the footwell.
FASCIA PLATE SET-UP
1. With the main fascia removed from the dashboard, disengage the clips that hold the air conditioning
unit in place and re-locate to the appropriate opening on the new fascia.
2. Then remove the switches for ‘ESP’ and ‘Park Distance Control’ located on the main fascia panel, and
again re-locate them to the appropriate openings on the new fasica panel.
3. Once the main fascia is out of the way, remove the 4x bolts that hold the radio in place and remove it
whilst disconnecting all of the wiring.
DASH MODIFICATION
Some plastics will need to be cut and removed from the dashboard to make space for the new car stereo.
Measure where the stereo will sit and take due care when modifying the vehicle. TopVehicleTech always promote the
help of professional installers. TopVehicleTech will not be held responsible for any damage to the vehicle.
2. Removal of the side panels will uncover 4x bolts, these will need to be removed to allow the removal of
the main fascia.
3. Attach the clips that come within the kit to the back of the new fascia panel.
