3
www.topvehicletech.com
FITTING GUIDE
1. Use a bojo tool to pry away and unclip the trim that surrounds the top screen display. When loose,
remove completely whilst disconnecting the hazard switch.
1. Open the passenger side door and proceed to pull away the door trim from the pillar.
STEREO REMOVAL
DAB ANTENNA INSTALLATION
2. Using a set of panel removal tools, begin to pry away the pillar casing.
4. The DAB antenna not only has a self adhesive backing, but also features a black earth sheet. When plac-
ing the DAB antenna, the earth sheet
MUST
be placed onto the metal part of the pillar. The antenna itself
must be located roughly 15cm from the top of the windscreen.
Note: this antenna must not be placed atop any kind of heating elements, this will interfere with the
antenna’s signal.
5. Once happy with the placement, take the 3m of wiring extension and feed it down through to the
stereo’s opening. With the wiring adjusted to the appropriate length, feel free to re-install the glovebox.
3. The glovebox will need to be dropped down to route the antennas wiring. To do this you will need to
remove 2x bolts located at underneath, 1x to the side, and 6x screws located within the glovebox itself.
Once free, simply leave in the footwell.
FASCIA PLATE SET-UP
1. Attach the brackets to the new stereo using the screws within the kit. With the brackets attached, offer
the whole unit to the back of the fascia using the plastic inserts at the bottom of both the brackets and
fascia as a guide.
2. Using the bojo tool again, pry away and loosen the climate control panel located at the bottom of the
dashboard. Once out, disconnect the panel and put to one side.
3. Using a pick tool, disengage the spring clips located on the inside of the the fan blades. When done
correctly, you can remove these completely.
4. Undo the two bolts that hold the original radio in place. When undone, remove whilst disconnecting all
of the wiring.
DASH MODIFICATION
Some plastics will need to be cut and removed from the dashboard to make space for the new car stereo.
Measure where the stereo will sit and take due care when modifying the vehicle. TopVehicleTech always promote the
help of professional installers. TopVehicleTech will not be held responsible for any damage to the vehicle.
2. When happy with the alignment, and the “
Stereo Installation
” process is complete, simply put the unit
into place and firmly press on the edges of the fascia to ensure it clips into place.
