3
www.topvehicletech.com
FITTING GUIDE
STEREO REMOVAL
FASCIA PLATE SET-UP
1. Take the brackets that come within the kit and attach them to the corresponding sides of the new
stereo.
2. With the brackets attached, roughly test fit into the dashboard and place the new fascia over top. Doing
this, you can measure whether the brackets need moving forward/backward.
3. With the bracketry aligned, and the “
Stereo Installation
” process complete, you can then install the
stereo into the dashboard using the pre-existing screws, and place the new fascia over top to complete the
installation.
1. Use a panel removal tool to remove the main fascia panel from around the main head unit.
2. Remove the 2x screws that hold the main head unit into place. Once free, pull out of the dashboard and
disconnect all of the wiring.
