3
www.topvehicletech.com
FITTING GUIDE
1. Slot the stereo removal keys into the corners of the stereo, when locked into place, pull to remove the
radio from the dashboard, disconnecting the wiring in the process.
STEREO REMOVAL
FASCIA PLATE SET-UP
1. Start by attaching the brackets to the new stereo. These brackets allow you to set the specific depth of
the unit in relation to the fascia plate. Start by lining up the spacers
(Fig 1.)
on the inside of the plates
(Fig 2.)
.
2. Attach the spacer and plate combination to the corresponding side of the stereo using the screws that
come with the stereo. Then simply slide the stereo into the radio cage.
3. Take the fascia in hand, and slide the cage through the front of the fascia. If the depth/alignment of the
stereo hangs out too much/is reccessed to far, use the radio removal keys
(Fig 3.)
to release the stereo
from the cage and repeat the process.
Fig 1.
Fig 2.
Fig 3.
