11. Use steel ruler to measure the length where the stab
servo will install inside the stab.
14.Apply marking tape around the horn to keep clean
when glue the horn in the elevator and connect it to the
servo arm.
12.Measure the same length on the bottom of the stab, mark
it and trim a slot for the stab servo arm.
Accessory list for the coming installation steps.
13.Assemble the stab servo to the stab with screws and screw
driver.
15.Apply instand type AB glue to the slots in the rudder,
vertical fin, assemble the rudder to the vertical fin with
hinges.
第 6 页
Summary of Contents for Sport Jet Aspire ARF
Page 1: ...TopRCModel USA com ...
Page 2: ...TopRCModel USA com ...
Page 3: ...TopRCModel USA com ...
Page 14: ...第 14 页 ...