background image

Thanks for your purchasing our MX2 3D sport aircraft 

from Top RC Hobby, hope this aircraft will bring the 

endless joy to you.

★ 

MX2 is configured with 3720-880kv out-runner 

brushless motor, 50A Brushless ESC, driven by the 4S 

Lipo battery, making the aircraft have a very strong 

power.

★ 

MX2 adopts the naca0015 airfoil design, with a high 

precise control, makes an excellent high incidence and 

low speed performances.

 MX2’s ailerons, elevator and rudder are all designed 

with large control surface, can easily finish many high 

difficult 3D aerobatic maneuvers.

 MX2 is with Large side area of the fuselage, while 

in side flight it is very easy to control.

 With hollow main wing design, to make sure of the 

strength of the aircraft, and configured with carbon 

fiber landing gear , the overall weight of the aircraft is 

reduced, which can make a very excellent 3D flight 

performances.

 Configured with 4pcs 9g metal gear servos, and 

double ball link pushrods, providing the precise control 

and fast responses, make the accurate 3D flights!

 With the super large battery compartment design, 

you can add your FPV devices to the MX2,  such as 

FPV camera, Gopro, Gyro etc, to enjoy the FPV flight. 

Also adding the Flight controller/Gyro can make the 

flight very easy without worry of crashes.

 The whole plane scheme is very simple and 

generous, bring us a very pleasant flight experiences.

1

Fuselage, Main wings, Horizontal wing, Connectiong Rod for Horizontal Wings, Connecting rod for Main Wings, Radio set, 

Charger, accessories bag, battery fixing plate(wood).

RTF version

Brief Introduction

1

Kits without radio

Kits without radio, charger and battery

Without any electronic parts

Product Constitution

ARF version

PNP version

KIT version

Main Specifications

★ 

Wingspan 1230mm

★ 

Length 1300mm

★ 

Weight  1400g

★ 

Thrust: ≥2500g

★ 

Flight time: ≥8min

Main configuration

★ 

Motor 3720-880KVKV

★ 

ESC 50A

★ 

Servo : 9g (metal gear)*4

★ 

R/C System 2.4GHz 4Ch /optional

★ 

Battery: 14.8V 2200mAh 20C/optional

Summary of Contents for 3D Sport MX2














Reviews: