6
Make sure that the supply voltage matches the voltage requirements indicated. (15% deviation is allowed)
If you increase the length of the leads, be aware that possible damage may occur with excessively long leads.
- Ground the unit with a minimum of 6mm² (10 gauge) wire to the earth ground as the drawing.
- Connect the earth lead connector to the negative (-) quick-connection terminal, and turn clockwise to tighten.
- Connect the electrode clamp holder to the positive (+) quick-connection terminal and turn clockwise to tighten.
Installation
AND OPERATION
CAUTION: Make sure the above connection for direct polarity welding; for inverse/reverse polarity , invert the connection: earth lead
CONNECTOR to the quick-connection positive (+) terminal and the electrode holder clamp connector to the negative (-) terminal.