1.BRIEF INTRODUCTION
CUT-40M INVERTER AIR PLASMA CUTTING MACHINES are all our own high-new
technical products with special purpose power parts and up-to-date inverter control IC. The
machines hold a safe lead of traditional products and other inverter cutting machines by their
cutting thickness ,seam smooth degree, arc generation and cutting current ,and the machine is
compressed air and the cost of cutting is very low. All stainless steel,copper,Aluminum,titanium,
cast steel,alloy steel,carbon steel and compound metal material can be cutting in all position.
2. OPERATING CONDITION AND WORK SURROUNDING
1.Operating condition: Reliable grounding protection
±
Voltage of power source: 1 x110V or 220V
10%
2.WORK SURROUNDING
℃
Relative humidity: Not more than 90%(average monthly temperature not more than 20
)
℃
℃
Ambient temperature: -10
~ 40
The cutting site should have no harmful gas ,chemicals,molds and inflammable matter,
explosive and corrosive medium. Avoiding rain water. And operating in rain is not allowed.
3.MAIN TECHNICAL SPECIFICATIONS
4.DESCRIPTION OF THE ERECTION
1. The voltage of the output ends is very high. Don't touch with the output ends, cutting torch and
other conductive parts while setting up an electric circuit.
MODEL
CUT-40M
Power Voltage
1 x110V
±
10%;50/60Hz
220V
±
10%;50/60Hz
Input Current
35A
30A
Rated Output Current
25A
40A
Current .Adjusting Range
15-25A
15-40A
No-load Voltage
200V
Rated Duty Cycle
60%
Working Mode
Contacting/notContacting
Air Pressure
0.2-0.4MPa
Max. Cutting Thickness
12mm
After Flow Time
10S
Outline Dimensions
390
×
190
×
290
