5
Two horizontal stabiliser panels pre-drilled ready to
receive control horn.
Note left and right panels are identified by joiner
recess on lower face only.
Horizontal stabiliser joiners with fixing screws.
Control horn with clamp connector, backplate and
fixing screws
Elevator push rod.
Vertical stabiliser-fin.
Main Undercarriage and nose gear units.
Two sets of lightweight wheels fixed onto wire
torque rod undercarriage.
Four clamp plates and 8 fixing screws for securing
to wing plates.
Nose gear steering arm is factory installed in
fuselage.4 function fully proportional 35Mhz
transmitter.
Available on 5 alternate 35 MHz frequencies.
Summary of Contents for F-4E Phantom
Page 1: ......
