13. Play next song: Press"+/-" one time to play the next song.
14. 0n/off mute: Press "Vo1+" & "Vol-" for 3 seconds until you hear a
beep to turn on / off MIC.
Important operation notice:
Bluetooth® paring
Bluetooth® paring is the phrase used for Bluetooth® products use: it
makes the Bluetooth® devices connect wirelessly to other devices via
simple operation. For example, you must enable the Bluetooth®
function on your mobile phone or device, if you want to use the mobile
and Bluetooth® headset, then put the headset in pairing mode and
search for the headset in your bluetooth function on your device, pair
and connect by password.
TDDESOTH-01 Bluetooth® Stereo Headset Paring:
l. Make sure the headset is off ( see Switch on/off)
2. Press and hold multifunction key for 7 seconds until red and blue
LED flash alternately.
3. Follow the operating instruction of your Bluetooth® mobile phone
to start the pairing process, Typically, this is done by going to a
" Connect" or "Setup" menu and then selecting the option to
search the Bluetooth® devices.
4. The mobile device will find TDDESOTH-01 and ask you if you wish
to connect your mobile with this headset. Press "Yes" or "Confirm" to
confirm this action.
5. Enter password or PIN 0000, and press "Yes" or "Confirm".
(Notice: If the connection is successful, the blue LED of the headset
will flash 3 times. Then blue LED will flash one time every 7
seconds. If the paring is unsuccessful, the red and blue LED will
continue to flash alternately. You please turn off the headset and begin
paring again.)
