General introduction:
§
This
wireless
reverse backing system is designed for vehicles to increase their rear
viewing
to
potential
ly
help reduce backup accidents
.
§
The 4.3 inch monitor works with the reverse camera to show the images behind your
vehicle as you reverse
§
Install
(self or professional)
:
Installation should take about 30
-‐
60 minutes for self
-‐
installation.
Installer must be abl
e to find and tap power into reverse back
light
s
.
Please visit
www.topdawgelectronics.com
to learn more about installation. Also,
visit our YouTube channel (search Top Dawg Electronics) to see a demonstrati
on on how
to install this backup camera. If you do not have the technical ability to install this
camera, professional installers located at car stereo retailers and other auto electronics
locations should be able t
o install this camera for you at
a cost o
f
$75
-‐
$
200
, depending
upon your location and installer.
Specifications:
Monitor
•
Screen size: 4.3 inch
•
Display Screen: TFT
-‐
LCD
•
Display Resolution: 480(H)*RGB*272(V)
•
Aspect Ratio: 16:9
•
Power Consumption: <3W
•
Power Supply: DC 12V
•
Video input: to back up
camera
•
Signal System: PAL/NTSC auto
•
Brightness: 250cd/m
•
Contrast Ratio: 350:1
Camera
•
Image sensor: CMOS
•
Effective Pixels: 720(H)*480(V)
•
Resolution: 420TV line
•
Lens angle: 1.9mm(170 deg)
•
AGC: auto
•
White balance: auto
•
S/N ration: greater than 48dB
•
V
ideo out
put: BNC connector
•
Power 12V DC
•
Waterproof grade:IP67
•
Signal system: NTSC
•
Camera cable length: 30 foot