TOORX Rower Force, Instruction Manual

Page: 18 / 20

18
TRANSMISSION LED INDICATOR
For checking operation of transmitter, the red LED indicator will flash indicating
the transmitter is in operation. Adjust the Transmitter position to keep the LED
indicator flashing consistently for accurate readings.
TRANSMITTER BATTERY INSTALLMENT
Slide the CR2032 battery at an angle and make sure during battery installation
that the battery is first pressed against the side contact (positive electrode) and
then pressed into the battery compartment.
Place the battery rubber pad(O-ring) and battery cover properly into the case then close the
cover tightening it with a coin or similar object.
The rubber pad (O-ring) ensures water proof protection of the battery compartment.
IMPORTANT
Make sure to close the battery cover very tightly as below illustrated to prevent sweat and
moisture from spoiling the battery composition.