TOORX MSX-70, Instruction Manual

Page: 12 / 28

(A) Place one pc plastic cover (55) through the post as the diagram shows. And attach the right butterfly
adjustment frame(21) to the front press base,Secure them with one pc Lock ring(59), one pc Ø10
washers (100) and one pc M10*16 Allen bolt(93).
(B) Insert the right butterfly (8#) into the hole as the diagram shows,Secure them with one pc Ø50*20
bushing(56), one pc Ø50*35 bushing(57),one pc spacer(58), one pc Ø10 washers (100),one pc
M10*20 Allen bolt(92), one pc quick release lock pin (52), one pc Ø8 washer (101) and one pc M8
aircraft nut(103). You would adjust the desired butterfly position with the quick release lock pin(52)
when exercising.
(C) Attach the butterfly foam roll(50) to the right butterflyfrom the bottom as the diagram shows.
(D) Attach the butterfly handle (16) to the right butterfly and secure them with one pc M10*20 Allen
bolt(92) and one pc Ø10 washers (100).
(E) Install the left butterfly (7) with the same way .
Assembly instructions
12