TOORX MSX 60, Instruction

Page: 19 / 32

(A) Draw the lower cable (32) through the first bracket,make sure that the ball stopper should be in front of
the bracket. Place one pc pulley onto the lower cable, Secure the pulley , one pc cable retainer(102) ,
one pc cable retainer bushing(103) with one pc M10*50 allen bolt(61), 2 pcs Ø10 washers (67) and
one pc M10 aircraft nut(69) .
(B) Draw the cable backwards and go through the opening of the front vertical frame,Place one pc pulley
onto the cable and secure the pulley with the same method in A.
(C) Draw the cable around the pulley and upwards and place one pc pulley below the cable. Secure the
cable , 2 pcs cable retainer(102) , 2 pcs cable retainer bushing(103) with the same way in A.
(D) Draw the cable downwards and place one pc pulley onto the cable, Secure the pulley with the same
way in C.
(E) Draw the cable upwards and place one pc pulley below the cable.Secure the pulley with the doubel
floating pulley bracket with the same way in C.
(F) Draw the cable dowmwards and fix the end of the cable as the diagram shows with one pc M10*28
Allen bolt (55), 2 pcs Ø10 washers (67) and M10 aircraft nut(69).
Step 9