STORAGE
•
To store the BIKE, simply keep it in a clean dry place.
•
To avoid damage to the electronics, remove the batteries before storing the BIKE for one year or more.
•
Follow the illustrated process below to fold the BIKE.
Remove the Pull Pin (D18) from the Rear Frame (A2).Fold the Rear Frame (A2) close to the Main
Frame (A1) and lock it in folded position with the Pull Pin (D18). And, folding down the Back Cushion
(B25).
NOTE: Make sure the Pull Pin (D18) goes through the holes on both sides of the Rear Frame (A2)
and the tube on the Main Frame (A1).
The safety and integrity designed into the
BIKE
can only be maintained when the
BIKE
is regularly
examined for damage and wear. Special attention should be given to the following:
1.
Adjust the Adjustment Knob (B32) and verify that it functions properly and the resistance changes.
2.
Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that
the left pedal has left hand threads and is tightened by turning counterclockwise.
3.
Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4.
It is the sole responsibility of the user/ owner to ensure that regular maintenance is performed.
5.
Worn or damaged components shall be replaced immediately or the BIKE removed from service
until repair is made.
6.
Keep your BIKE clean by wiping it off with an absorbent cloth after use.
