20
⑪
With pulse signal input, PULSE window will display user actual pulse. Pulse window displays
nothing if no pulse signal input (Figure 19~20).
⑫
Press any PROGRAM key then perform the program accordingly.
3.5 Target TIME mode:
①
In Standby mode, press Target Time key and. TIME
will light up, along with a long sound for 1s.
②
TIME value is flashing, press UP and DOWN to adjust value (Figure 39) and press ENTER to confirm meanwhile
buzzer beeps 1s
and TIME
lasting lighting up.
③
Preset TIME value counts down , DISTANCE, CALORIES, WATTS, SPEEED, RPM start to count up. (Figure 40)
④
Press START button once enter into PAUSE mode,Buzzer will sound for 0.5s per second within 30s. All values are
displaying on LCD and flashing in every 2s. If continue to stop training for 5 minutes, buzzer sounds 2s and enter to
Wake-up mode. Press START to resume workout.
⑤
No signal inputs for 30s, buzzer sounds 1 short beep and enter to Wake-up mode.
⑥
Press STOP or end up training, TIME will display total workout time; DISTANCE will display total workout distance;
CALORIES will display total consumption during workout; WATT, SPEED and RPM will switch to display AVG. &
MAX. PULSE window will switch to display 65%, 85% MAX (Figure 21~23) each 5s.
⑦
With pulse signal input, PULSE window will display user actual pulse. Pulse
window displays nothing if no pulse signal input (Figure 19~20).
Summary of Contents for BRX AIR300
Page 1: ...Ed Rev INSTRUCTION 01 21 GRLDTOORXBRXAIR3 00...
Page 2: ...3 EXPLODED DIAGRAM...
Page 3: ...4...
Page 4: ...5 HARDWARE PACKAGE...