EN
17
4.
Press the power switch to power up the docking station.
5.
Wait at least 10 seconds till the docking station is
prepared.
6.
Keep pressing the CLONE button for 3 seconds to begin
duplication.
Duplicator (CLONE) Mode
This section will introduce how to clone a hard disk without
the need of a PC.
(The Duplicator Mode only works when
the docking station is NOT connected to a PC via the USB
cable.)
For clonation of a hard drive, you will need two hard drives:
Source disk:
drive with the data you want to
duplicate(clone).
Destination disk:
in which you want to store the data of
the source disk.
Begin to duplicate (clone)
1.
Make sure that those hard drives have no bad sectors.
Bad sectors will cause unpredictable problems.
2.
Put the
Source disk
into the
A bay
. then, put the
Destination disk
into the
B bay
. Please make sure that
those hard drives are correctly and firmly connected to
those SATA connectors of the docking station.
3.
Connect the power adapter to the docking station and
to the main.
The capacity of the destination disk should be equal
or larger than the source disk.
All data on your Destination HD will be lost. If you
have important data on the HD, please back up the
data before beginning the operation.
