TOONG IN ELECTRONIC CORP.
Copyright © 2005. All rights reserved
15
Switching Between Music and Phone Calls
1.Setting Up / Prerequisite
(1) Find a Bluetooth cell phone.
(2) Turn on the Bluetooth stereo headset. Pair the headset with the cell
phone.
(3) Please confirm the headset has been added to a list of “Paired Device” in
the Bluetooth enabled cell phone.
(4) You can see the section "Responding to Cell Phone" for reference.
2.Playing the Music
(1) Turn off the Bluetooth stereo headset.
(2) Use the Bluetooth TX/HCI dongle to connect the headset.
(3) Play the music.
3.Making the Switch
(1) Use the cell phone and find the headset on the “Paired Device” list. Then,
operate the cell phone to connect to headset.
(2) When the connection is set up, the music will pause and you can switch to
the cell phone mode automatically. You can start to make an outgoing call
and are able to converse over the phone.
(3) When your conversation is done and you stop using the cell phone, the
streaming of music will resume immediately and automatically.
(4) If someone calls you, the music will pause and you can answer the
phone.
(5) After that, the music will resume again.
(6) You can repeat this scenario and switch freely between cell phone and
music mode.
3.Turning Off
Once you are done, turn off the headset. If you don’t want to use TX/HCI
dongle either, please set the switch into power off mode.
