14
ASSEMBLY AND USE
1. Assembly
a. Safety guard and support wheel assembly
1) Remove four mounting screws from motor housing.
Note: They are pre-mounted on the motor
housing by factory to help end-user find them
quickly. And send a message to end-user, where
these four screws should be used for.
2) Fit the safety guard onto the motor housing.
3) Fix the safety guard in place by using these 2 screws.
4) Fix the edging wheel in place by using 2 screws.
b. Front handle assembly
1) Loosen the knob and remove it together with the bolt from
the auxiliary handle.
2) Align the auxiliary handle to the support and place it onto
the grass trimmer.
3) Insert the bolt from the right through the opening. Ensure
that the bolt head sits properly in the recessed shape in the
support then tighten the knob.
c. Plant protector assembly
Assembly the plant protector into the slots at front .
1
1
2
3
